Report Message 117 - $PRFI

Proprietary NMEA message containing CDMA network information to assist in network diagnostics.

Note: parameters for this command are only available for specific data cards/modules.

Message format is:
$PRFI,aaaaa,rdBm,tdBm,b,c,e,s*hh<CR><LF>

Where:
aaaaa is the network System ID (SID)
r is the current EVDO RSSI value
t is the current TX power adjust value
b is the band class: 0 = 800MHz; 1 = 1900MHz
c is the current center channel number
e is the current Ec/Io value
s is the current Slot Cycle Index (SCI)
hh is the message checksum

Example: